In recent versions of OBM, the ability to add or remove SupportLines was added. While this is helpful in some cases, it would be more helpful to have the ability to change which SupportLines a given Deck or Beam Layout belong to. That way if the S...

OBM does not currently allow for bent connection plates for diaphragms / cross frames. We need that ability to cover bridges skewed between 20 and 45 degrees.

When annotating elements using an affix (prefix or suffix) tied to a Text Favorite, OpenRoads currently annotates the affix even if the Text Favorite evaluates to a blank or null value. This results in: Stray symbols, separators, or units (e.g.,...

Add OpenRoads Designer Civil functions to Python integration allowing development of Python applications that can access/call the Civil Design processes within OpenRoads

Add a variant to the deck breakback that allows you to adjust the angle from the break point or add a deck variant that lets you set a distance from face of backwall which would automatically set your breakbacks without the need to give a distance...

Reinforcement is typically tied together and is 3D modeled to reflect that. For example, a U bar tied into longitudinal/vertical bars. When a section cut is taken, the drawing models appears to show a single long U bar and not 2/3 separate bars. B...

Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...

In the substructure reinforcement maybe need to be modeled in separate groups (using irregular dispatch, single rebar distribution etc.) to avoid obstructions like plies or girders that are cast into the concrete abutments/wingwalls. This may nece...

Allow for an OBM bridge to utilize bridge components from a referenced OBM file to create geometry. Example: A project requires parallel design for steel and concrete beams. Allow OBM "File A" to contain the alignment, profile, deck, and steel bea...

1)CS0179668 Currently when we do profile view drawings we are creating a section cut with depth zero using the alignment as reference. When we have curved bridge in plan or a even number of girders, the cut doesn't show the girders because they ar...