Need Support? Let’s guide you to the right answer or agent.

OpenCivil Ideas Portal

ADD A NEW IDEA

Applications

Showing 1234 of 1377

Add Elevation Mode "3D Element" as an option when placing points

We need to have the ability to place points by snapping to 3D elements (ORD Geometry & Regular Microstation Linework) This is how we give set out points to contractors for grading work. The only way to do this currently, is to choose Elevation...
about 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Support for LEAP

I would like to see an upgrade and continued support for LEAP Bridge Concrete and LEAP Bridge Steel. Most recent updates I have seen are from 2020 and with the ever increasing demand for Model Based Design it will be imperative to upgrade and prov...
about 1 year ago in OpenBridge Designer 0 Already exists

Improved Interoperability Between OBM > LBC/LBS

I would like to see an improvement to the interoperability - Once you "Send To [LEAP]" the bridge model from OBM you are no longer able to modify the bridge in OBM and UPDATE the existing .lbcx file you are working in. I understand that significan...
about 1 year ago in Import/Export / OpenBridge Modeler 0 Already exists

Design Footing with sides that are parallel to the column sides

Some tight geometric conditions require a this scenario
about 1 year ago in OpenBridge Designer 0 Future consideration

Known issue where the undo command undoes all operations or none.

Please try to address this known issue. We are experience it in multiple users in projectwise files. No consistency noted. Is there a undo buffer variable that coul be causing this issue? Thank you. https://communities.bentley.com/products/microst...
over 1 year ago in OpenRail Designer 0

Allow user to define width of superelevation section graphic.

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...
7 months ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Turn on/off elements in the main dgn will change on all the sheets.

It is expected to turn on and off elements in the container file and it will reflect those changes on all the profile sheet models.
about 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Already exists

Automatically calculate values when inputting into property fields

When inputting numbers into property fields, ORD can automatically calculate them for you. Example: Survey field team shoots the top of casting elevation of a manhole at 500ft, then shoots again for a bottom invert of the manhole but only leaves a...
7 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

Create 3D by slope to terrain needs to have the option for the fill slope to be positive and vise versa for cut slope

When projecting a line to a terrain currently the only option for fill is down and cut is up. This needs to be a user selectable option. There are many cases where the proposed surface is above the existing ground yet the fill projection needs to ...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 2 Future consideration

Store vertical/horizontal alignment of low points

A tool existed in Geopak that could pick out the low point of a cross section to the left and right of centerline and construct horizontal and vertical alignments from that. This essentially automated the creation of a ditch profile along an entir...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration