Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Functional Areas

Showing 1154 of 1368

Ability to flip/reverse cross sections around baseline.

Ability to flip/reverse cross sections around baseline. Currently, when you reverse section, it does not hold station 0.
almost 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Graphics should be excluded from being made part of a complex alignment

If a grahic, a constuction line for example, is touching an alignment element, it will be included in the alignment when the "automatic" funtion is used in Create Complex Geomtery tool The create complex geomtry tool should only take into account ...
almost 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Combination of Alignment .dgn

A function that allows you to copy an alignment from a reference .dgn would be extremely helpful. It would great if it could be copied across intelligently, with associated featured (vertical profiles, cant etc). Currently copies a 3D graphic at b...
almost 2 years ago in Geometry / OpenRail Designer 3 Future consideration

Modeling of Steel Truss Bridges

Need to be able model simple as well as complex steel Truss bridges
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Future consideration

Model a straight bridge on a curved alignment

The ability to create a straight bridge when the alignment transitions from tangent to a horizontal curve on the bridge. Currently the deck ends are controlled by the bridge skew from a radial line at the end of the deck rather than from the tange...
about 1 year ago in Geometry / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Geometry Connector: Add column for degree of curve for an arc

Please Add column for degree of curve for an arc. The Geometry Connector should show the Degre e of Curve for an Arc, and not just Radius. It is annoying to have to use Excel or a calculator to go back and forth when you need a curve to be a certa...
about 2 years ago in Geometry / OpenRail Designer 0 Future consideration

Option to keep siding alignment start station in synch with mainline alignment

Option to keep siding alignment start station in synch with mainline alignment as shown in the attached video
about 2 years ago in Geometry / OpenRail Designer 0 Future consideration

Ability to separate the annotation of curves and spirals for the rail cant

Ability to separate the annotation of curves and spirals for the rail cant. At present the Non-Linear setting is applying to both This is usefull to remove some clutter (especially where there is short elements like below;
about 2 years ago in Annotation / CANT / OpenRail Designer 0 Future consideration

Needs ability to set RIM Depression Depth

Needs ability to add RIM Depression Depth with elevation (ground). Currently we can only set the Elevation (RIm) but not any depression value.
almost 2 years ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Open profile from profile view

While I am in a profile view, I would like to be able to open a new profile from a different horizontal without having to activate the 2D view. It is a small thing but would be nice.
over 1 year ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 4 Already exists