Having the ability to quickly check both existing and design crossfall/superelevation would increase efficiency within the program as there would be no requirement to run a template and report to evaluate existing cross slopes

I know parametric constraints can be exported but if a corridor becomes corrupt then being able to rebuild it from scratch easily would be useful. Similar to an input file in MX

I'd like a tool that synchronizes all template drops in all corridors in a file, right now they have to each be manually selected in the explorer or on screen.

Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...

In the previous Bentley software our DOT used, the software was able to connect the cut and fill lines when transitioning from cut and fill between template drops. Currently the only way that is possible is to have a feature name override on the c...

Beam haunches should have more robust parameters or even model templates. some examples would be: the ability to allow exterior haunches to extend to the edge of deck independent of the top flange of the girder/beam. also allow it to taper to a ...

As a Highway Designer I want the Corridor Objects-Point Control window to include a column in the table that shows which point is being controlled so that I can sort based on that point name to quickly determine which point controls applied to tha...

I propose to add the possibility of dividing corridors with the retention of all attributes and elements such as point controls, feature definitions, keystations, etc. It can be seen in the programme files that such an intention to introduce a fea...

We need an Expression that gets the offset of the center of a component in the 3D model. Currently it is getting the offset from the closest point in the component. When the component is away from the alignment, this is acceptable, but if the comp...

Seems that users generally shouldn't be adding plan based reference files to dynamic cross section or profile window design models known as non-indexed models. Would be nice to prevent someone from accidentally doing this and not realizing.