Currently, if an OBM model is defined with a strut/web wall between pier columns, the strut will not transfer to LBS, and there is no way within the LBS substructure design module to add a strut/web wall. This is a hug problem because we have brid...

OBM does not currently allow for bent connection plates for diaphragms / cross frames. We need that ability to cover bridges skewed between 20 and 45 degrees.

Currently, for abutment and piers, when battered piles are used in combination with an embedment length, the pile location is set based on top of pile not the bottom of footing. When users input pile spacings into the pile layout dialog, it is not...

Our partner Dataforensics has a project with an OpenGround user, HDR where they need to plot borehole data and CPT data in OpenRoads. Seems like they were able to do this in Civil3D but are now using ORD and want to do the same as the attached

Currently 3D elements that are curved are rendered with a series of line segments. While this might be okay for some applications, it makes the 3D model very unhelpful for plans production (i.e. you cannot dimension radii of curves). We need the c...

It would be great if we could control the vertical end cut orientation of the concrete girders: Normal (as is) and Vertical (plumb to the world). Also, we often have to clip the corners of girders when bridges are on heavy skew. Would be nice to b...

it would be useful to add a top of cheekwall elevation as an item type.

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.

Currently OBM requires atleast two beams in the beam layout. Users working on bridge expansion projects, or with rail bridges have requested allowing bridges with a single beam.

Users are asking for item types for Parametric cells. Primarily for quantities reports.We tag each element, but can we expose volumes for each element in a Parametric cell. The most important things are Volume, Surface Area, Length(Column, Pile, C...