Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Applications

Showing 1263 of 1410

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
about 2 years ago in OpenRoads Designer 0 Future consideration

Coincident Sheets with Drawing Boundary

Please add the option to automatically assign coordinate systems to drawing and sheet models based on the design models and to place the sheets coincidently even when they contain drawing boundaries. Right now, we cannot create georeferenced pdfs ...
9 months ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 2 Will not implement

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Flextable Export to Different Custom Excel Styles

Currently, Flextable can only export to csv with all colums. To make as proper report, user need to manually copy/paste the data. If the Flextable or software can export those nodes, conduits and hydrailuc properties, computation results to select...
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Already exists

SignCAD - Option to Rotate/Mirror Graphics

In previous SignCAD versions, we could rotate or mirror graphics. That is not longer possible. This makes it much more difficult to create custom signs. We have to hunt for a standard graphic that is available or create a new one. This recently ha...
over 1 year ago in OpenRoads SignCAD 0 Planned

Numerical display for applied cant

Recommended that a when using the cross-section tool to view the applied cant along the alignment, the tool displays the cant as numerical value on the cross-section. The number should be generated automatically and displayed next the chainage...
over 1 year ago in CANT / OpenRail Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
about 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Openbridge: add the ability to have curved abutment and or curved retaining wall

Openbridge: add the ability to have curved abutment and or curved retaining wall
over 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review