Need Support? Let’s guide you to the right answer or agent.

OpenCivil Ideas Portal

ADD A NEW IDEA

OpenBridge Designer

Showing 141 of 1366

Modeling horizontal bracing for steel girder bridge

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.
almost 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

The ability to edit the positioning and placement of a dimension.

Once a dimension is placed, it seems to be set. The ability to place a dimension and then later be able to adjust it would be tremendous. Not only the ability to adjust the placement of the dimension, but the ability to adjust the placement of the...
over 1 year ago in Annotation / OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRail Overhead Line Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer 7 Already exists

Save LeapBridge Concrete design that is exported from LeapBridge Steel

Currently, any substructure design that is created from LeapBridge Steel (LBS) is stored directly in the OpenBridge Designer (OBD) file. To allow multiple people to work on a project at once, it would be easier to have a save as option in LBS Subs...
over 1 year ago in Import/Export / OpenBridge Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
about 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Openbridge: add the ability to have curved abutment and or curved retaining wall

Openbridge: add the ability to have curved abutment and or curved retaining wall
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Allow rename of Bearings

Users should be allowed rename the Bearing group names and the individual bearings in a group.
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Planned

TAC Superelevation XML File

Would be nice if Bentley could provide a Superelevation XML file for TAC Canadian users. The AASHTO XML seems to work but it is not compatible with the TAC Canadian standard.
over 1 year ago in OpenBridge Designer / OpenRail Designer / OpenRoads Designer 0 Future consideration

Allow Pier Diaphragms to fall between the beam ends rather than encasing the beams inside the diaphragm (TDOT).

TDOT doesn't encase the beams inside of the pier diaphragms. TDOT places an 18" diaphragm between the beam ends with bent-up strands being used for anchorage into the diaphragm. If the bridge is skewed, the diaphragms are skewed at a different ang...
about 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review