I will use ORD as an example. I, along with many others, have chosen to remain on ORD 10.12 due to a constant string of issues with more current releases. Most recently, I tried to upgrade a project from 10.12 to 24. This resulted in my Text File ...

This addition would allow a truck other than the AASHTO Fatigue truck to be checked for the fatigue load case when the design criteria require a different truck. Currently, it is NOT possible to check the fatigue load case for a live load other th...

Many times an alignment is partly existing and partly new or changed. In the drawings this should be shown with different symbology and annotation, something that is not easy in ORD. A tool that can do this would be very useful!

For now, the annotation of High and Low Points is very limited:# only one Low Point is detected - multiple low points are ignored# its is a linear3D annotation, and snaps on the annotations are not ruled (this intent is to be able to place drainag...

Corridor design input report provides much of what we need to reconstruct the corridor, but not a list of linework listed in the corridor attachments.

Creating an Annotation Group for the Crossings --> Annotate with CellPlacement - Rotation Option: here is missing the option, that we have for the turnouts, to place the cell "Element Aligned"...Because of this you need to create 2 different an...

💡 Problem in Bentley Templates In Bentley software, defining dependencies between points requires creating a very large number of individual points. This makes templates complex, cluttered, and difficult to edit, since every relationship must be r...

In the substructure reinforcement maybe need to be modeled in separate groups (using irregular dispatch, single rebar distribution etc.) to avoid obstructions like plies or girders that are cast into the concrete abutments/wingwalls. This may nece...

Reinforcement is typically tied together and is 3D modeled to reflect that. For example, a U bar tied into longitudinal/vertical bars. When a section cut is taken, the drawing models appears to show a single long U bar and not 2/3 separate bars. B...

surface templates apply depth vertically, in many cases it is desired a true depth that is perpendicular to the terrain.