Need Support? Let’s guide you to the right answer or agent.

OpenCivil Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1152 of 1152

Allow user to define width of superelevation section graphic.

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...
about 14 hours ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Dynamic leader to Civil Labeler

It would be nice if Civil Labeler could have dynamic on/off leader. If the label text is moved x.xxm away from insertion point, the leader become visable.
about 22 hours ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Automatically calculate values when inputting into property fields

When inputting numbers into property fields, ORD can automatically calculate them for you. Example: Survey field team shoots the top of casting elevation of a manhole at 500ft, then shoots again for a bottom invert of the manhole but only leaves a...
3 days ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

Description Fields for Corridor Inputs

For the modeling and model review process, it would be helpful to have Description fields for common corridor inputs, such as Parametric Constraints, Point Controls, etc. that can be easily discovered using the Corridor Objects tool.
3 days ago in Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

ModelBuilder Units

When stepping through model builder there is an option to set the units that are to be used in the design file; however, when the property is set in the field mappings, it does not automatically default to what was selected on a previous screen. T...
3 days ago in Drainage and Utilities / Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Needs review

Import Utilities using LandXML

There needs to be an option to import utilities from LandXML with the option to specify the import units. I have sewer information from a utility in LandXML format, but the units need to be set to US Survey Feet. Using the import from LandXML clas...
3 days ago in Drainage and Utilities / Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Needs review

Ability to have corridor/linear template pivot at end of alignment

Currently when developing a object that is at a skew, whether it be a road, bridge, culvert, or other detail modeling. If the start/end of the object is at a skew compared to the alignment that it is attached to, it is difficult to model. The user...
4 days ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Superelevation lanes have start and end points by default in tangents

Currently if you place a superelevation lane on a tangent alignment, no points will show up in the superelevation editor. I would like that automatically even in tangent sections, the start and end points are placed in the superelevation editor so...
4 days ago in OpenRoads Designer / Superelevation 0 Future consideration

Geometry manipulator handles on offsets do not overlap with manipulator text with zero offset

Currently when offsetting elements, different manipulator handles appear, however unless you go into the preferences and changes the arrow manipulator size, it is very difficult or impossible to select the trim/extend manipulator handle because it...
5 days ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

Graphical Results for Cross-Frames/Diaphragms

In the LEAP Bridge Steel analysis dialog box can there be an axial force diagram, with the cross-frames/diaphragms visible?
7 days ago in User Interface 0 Needs review