Need Support? Let’s guide you to the right answer or agent.

OpenCivil Ideas Portal

ADD A NEW IDEA

Applications

Showing 1248

Add ability to delete multiple template point's constrains at once while editing the Transition Midpoint

While editing the Transition Midpoint, we need to delete both the constraints of multiple template points. currently we can delete the constrains of point one at a time. This can become tedious process when there are lot of points of which both th...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add a negative function into longitudinal/transverse offsets

Greater flexibility for wingwall placement
almost 2 years ago in Geometry / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Place one bearing at pier location for continuous span concrete girder bridge design

Ability to place only one bearing at pier location for continuous span concrete girder bridge design, two girders shearing one bearing at pier location.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Modeling horizontal bracing for steel girder bridge

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Geometry - Copy Chain Parallel Command

There was a command in Geopak called Copy Chai n Parallel that was very useful in creating offsets of survey chains, and creating new points at constant delta elevations. We are looking for the same function to be added in OpenRoads Designer.
about 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
about 2 years ago in OpenRoads Designer 0 Future consideration