Implement Civil Accudraw for Dynamic Cross Section View
Similar to the plan and profile Civil Accudraw, it would be useful to have a tool to be able to view offset, elevation, and slope in the cross section interface. This is desired in the dynamic cross section view, where users could actively utilize...
Ohio DOT would like the ability to create Seeding Reports like those that could be generated within GEOPAK from the cross section candidate elements (or components) with their end width (slope lengths) including similar options that GEOPAK offered...
Be able to view on & off "Name, Field Code, Elevations, & Descriptions" for Geometry Points
I can view on & off "Name, Field Code, Elevations, & Descriptions" for Survey Points but for Geometry Points you have to annotate text graphics into your model. Seems to me that you should be able to view those the same weather it's a Geom...
Being able to put a feature definition on points created around a circular or arc template component.
When using a circle or an arc in a template component, the software is building linestrings on default level in the 3d model. It is possible to turn off these lines if the Null Point Linear Feature Option is set to False in the template feature de...
We need that when writing down the singular points of a railway deviation (P0, P1, P2 and P3), they are joined by straight lines P1 with P2 and P0 with P3. See attached image. In fact, the V8i version did represent the detour scheme. Thank you!
Allow the road slope to exceed the gutter cross slope
My state agency commonly uses gutters with a 4% cross slope. The maximum superelevation rate is 7%. The gutter slope stays at 4% in this situation. Spread does not compute in this scenario because "A depressed gutter must have a Gutter Cross Slope...
Exported TIN surface must carry same edge method on importing.
Exported surface in TIN format not keeping the same edge method while importing it in new .dgn file. So, it is expected to get such functionality where the exported surface should carry the same edge method or while importing any surface it should...
Our industry requires to provide accurate horizontal alignment's annotation which shows element's length between turnouts (not only length of whole plan elements). This is what could be done by "Switch Height Plan" tool in Power Rail Track (PRT). ...