Text Favorite: add Dynamic N,E,S,W preffix for MH labels
Add ability to have dynamic direction- N,E,S,W preffix in the label for MH labels Text Favorites. In Auto CAD the option is called "pipe direction". Following is the example of output required. (S) INV 99.8m (N) INV 99.7M
about 2 years ago
in Annotation
0
Future consideration
Allow user to define width of superelevation section graphic.
Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters.
If t...
Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
Automatically calculate values when inputting into property fields
When inputting numbers into property fields, ORD can automatically calculate them for you. Example: Survey field team shoots the top of casting elevation of a manhole at 500ft, then shoots again for a bottom invert of the manhole but only leaves a...
There was a command in Geopak called Copy Chai
n Parallel that was very useful in creating offsets of survey chains, and creating new points at constant delta elevations. We are
looking for the same function to be added in OpenRoads Designer.
When stepping through model builder there is an option to set the units that are to be used in the design file; however, when the property is set in the field mappings, it does not automatically default to what was selected on a previous screen. T...
There needs to be an option to import utilities from LandXML with the option to specify the import units. I have sewer information from a utility in LandXML format, but the units need to be set to US Survey Feet. Using the import from LandXML clas...
Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves
In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
Geometry Points ruled by Name to allow users to move Points by importing ASCII
Ruling point import by name would add some powerful automation to the software. If a user could import a Point via ASCII and have any existing Points with the same name update (while maintaining the same object) this would allow things like posts ...
about 2 years ago
in Geometry
0
Future consideration