Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

OpenRail Designer

Showing 1029 of 1451

Numerical display for applied cant

Recommended that a when using the cross-section tool to view the applied cant along the alignment, the tool displays the cant as numerical value on the cross-section. The number should be generated automatically and displayed next the chainage...
over 1 year ago in CANT / OpenRail Designer 0 Future consideration

Option to set station limits while creating Curvature Diagram.

I want option to set a station limits while creating Curvature Diagram so that we can focus on a very specific area instead of the whole geometry.
over 2 years ago in Geometry / OpenRail Designer 1 Future consideration

Allow user to define width of superelevation section graphic.

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...
10 months ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Automatically calculate values when inputting into property fields

When inputting numbers into property fields, ORD can automatically calculate them for you. Example: Survey field team shoots the top of casting elevation of a manhole at 500ft, then shoots again for a bottom invert of the manhole but only leaves a...
10 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

The ability to edit the positioning and placement of a dimension.

Once a dimension is placed, it seems to be set. The ability to place a dimension and then later be able to adjust it would be tremendous. Not only the ability to adjust the placement of the dimension, but the ability to adjust the placement of the...

Use GAGE instead of Center of Railhead for Template Placement when Creating Rails

The "Create Rails" tool utilizes the Rail Settings within the Design File. The gage lines are generated correctly based on the file settings, and so are the center of rail head lines, BUT these do not necessarily match the Template that is used to...
over 1 year ago in Modeling / OpenRail Designer 0 Future consideration

Add ability to update Element Templates that are already tied to Feature Symbologies

If you have Element Templates (ET) separate from your Feature Definitions / Feature Symbologies, ORD will make a local copy of an ET if it is used in a Feature Symbology. If that ET is updated, you must delete the ET and copy in the updated versio...
over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Workspace 0 Already exists

ModelBuilder Units

When stepping through model builder there is an option to set the units that are to be used in the design file; however, when the property is set in the field mappings, it does not automatically default to what was selected on a previous screen. T...

Import Utilities using LandXML

There needs to be an option to import utilities from LandXML with the option to specify the import units. I have sewer information from a utility in LandXML format, but the units need to be set to US Survey Feet. Using the import from LandXML clas...

Put the DEPTH point type back in the survey import

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...
over 1 year ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration